ISDC_DEV.PDF

(807 KB) Pobierz
®
A Winbond Company
ChipCorder Development Systems
ISD-SD101
Sound Development and
Programming System
ISD-ES002
Parrot™ Demonstration Board
ISD-SD200 AND ISD-SD203
Universal Sound Development and
Programming System
ISD-ES302
Demonstration Board
ISD-ES501
Evaluation System
ISD-ES001
Evaluation System
ISD-ES502
Demonstration Board
Table 1: ChipCorder Development Systems
ISD-SD101
ISD-SD200
and
ISD-SD203
ISD-ES001
ISD-ES002
ISD-ES302
ISD-ES501
ISD-ES502
ISD1100 Series
ISD1200 Series
ISD1400 Series
ISD2500 Series
ISD33000 Series
ISD4002 Series
ISD4003 Series
ISD4004 Series
ISD MicroTAD-16M
ISD5008 Series
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
ISD
1
A Winbond Company
ISD-SD101
Sound Development and Programming System
GENERAL DESCRIPTION
The ISD-SD101 Sound Development and Program-
ming System is a PC-based system that provides
users with a tool to develop high-quality sound
and voice messages, and subsequently program
these messages onto ISD ChipCorder voice
Record and Playback devices. The Sound Devel-
opment and Programming System consists of
one eight-socket desktop programming pod,
Sound Mapper™ software, one PC add-in digital
controller board (half slot), Programmer Soft-
ware, one Sound Blaster 16 WavEFFECTS™ sound
board, Sound Blaster 16 WavEFFECTS sound soft-
ware, and all the necessary cables. The ISD-
SD101 is engineered to interface with any 386-
based PC (or greater) and a VGA monitor.
The ISD-SD101 enables messages to be positioned
into exact address locations with Sound Mapper
software, an interactive “windows-like” graphi-
cal user interface. In the case of the ISD2500 Se-
ries devices, up to 600 different address locations
per device are available. This allows users to start
and stop messages at precise locations, in addi-
tion to maximizing the storage capacity of each
ISD part. Once a master recording has been cre-
ated, Programmer Software monitors the chip
record level for consistent quality and programs
up to eight ISD voice record/playback devices si-
multaneously.
Figure 1: ISD-SD101 Sound Development and Programming System
ISD
1
ChipCorder Development Systems
FEATURES
¥
¥
¥
Supports the ISD1100, ISD1200, ISD1400, and
ISD2500 Series.
Allows the programming of up to eight
devices simultaneously.
Messages may begin at any address
boundary supported by the device being
programmed.
EOM markers may be manually or
automatically positioned within the resolution
of the device being programmed (2X or 4X
the starting message resolution).
Verify exact EOM locations on every
programmed device.
Each programmed device contains a
maximum quality recording; every part is a
“master.”
Allows the reading of a previously
programmed ISD device into the computer
for additional editing or duplication.
CE certified for use in Europe.
INCLUDED WITH ISD-SD101
¥
¥
¥
¥
¥
¥
¥
¥
One complete Sound Blaster WavEFFECTS
Value Edition with 3 1/2” diskettes.
One ISD Digital Control Board.
One ISD Programming Pod.
One flat 40-wire connecting cable.
Two audio cables with mini plugs on
each end.
One microphone.
One set of stereo speakers.
One single 16
Ω
speaker.
¥
¥
¥
¥
¥
ISD-SD101 Sound Development and
Programming System User’s Guide
One 3 1/2” diskette with ISD software.
¥
NOTE
The ISD1500 requires an adaptor board.
¥
Figure 2: ISD-SD101 Interface to PC
2
Voice Solutions in Silicon
™
ChipCorder Development Systems
WHAT YOU NEED
1
¥
¥
¥
¥
¥
¥
A 386-based PC (or greater) (XT and PS/2 are
not supported).
At least 4 MB of system RAM and 8 MB of hard
disk space.
MS-DOS™ 3.3 or later and Windows™
versions 3.1 or 3.11.
Two uncommitted bus slots (one 16-bit slot
and one 16- or 8-bit slot).
VGA display monitor and mouse (pointing
device).
Line printer @ LPT1 (optional).
5.
The file or files to be programmed into the
ISD device are loaded into the ISD-SD101
Programming Software.
The graphical interface of the ISD-SD101
software is used to prepare each sound file
for loading into the ISD device memory.
6.
The sound waveform, EOM locations
and unused space are visually identifi-
able and can be trimmed as needed.
7.
When the required trimming and level set-
ting of the sound files is achieved, the soft-
ware allows the generation of an address
map of the sound files and creates a .chp
file for programming one to eight ISD de-
vices at a time.
TYPICAL OPERATION
The following sequence would typically be fol-
lowed to program one or more ISD devices:
1.
Record original program material via any
available analog or digitally mastered
means.
The original program material is loaded
into a PC's memory (using the sound
board, if in analog format).
SOCKET ADAPTERS FOR ISD PRODUCTS
(For prototyping and/or gang programming with
the ISD-SD101 Sound Development & Program-
ming System)
2.
Table 1: SOIC
Vendor
Emulation Tech.
(408) 982-0660
Part #
AS-28-28-03S-
6-GANG
Pkg. Width and/or
No-Connects
.300 inch
Input .wav files must have been sam-
pled at 22050 Hz In the monophonic 8-
bit mode.
3.
Use the sound editor program to do final
preparation of the words, etc., to be load-
ed into the ISD device.
Please note that the above adaptor will require
minor modification to accommodate the ISD
.350 inch SOIC (G) package.
The smaller SOIC (S) package will not need this
modification.
This might include noise reduction, elim-
ination or addition of quiet space,
change of volume levels, addition of re-
verberation, fade-in, fade-out.
4.
The sound editor program generates one
file per word, sound or phrase in .wav for-
mat. Each .wav file is then converted to a
.voc file for input to the ISD-SD101.
Table 2: TSOP
Vendor
Harbor Electronics
(408) 988-6544
Part #
32T-32D
Package
Size
32 pins
1.
When European CE approval standards are
required, the computer used must be CE certified.
System must be operated at ESD-protected
workstation location.
Please note that the above 32-pin adaptor will
require removal of pins 1, 16, 17, and 32 in order
to fit into the ISD 28-lead DIP socket.
ISD
3
A Winbond Company
Universal Sound
Development and Programming System

$ 6
6 . C

$ F

# ,

$

F +

% 6 & $#

6 $ %
%

'%%( "

B $

%

$ #
6

38

#
6 .
@
6 . 6/ "
6 ., 6/ 9 "# 6 .B
B $ %

6 %%

$

#

.. ; $

6 . #
6 :6 .

; $ $

#

Figure 1: ISD-SD200 Series
ISD
1

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin