evt168_brugermanual.pdf

(4660 KB) Pobierz
*****EVT-168 Electric Scooter Operation Manual*****
Contents:
1.
2.
3.
Page
Introduction ………………………………………………………………………………………………………........ 2
Operation…………………………………………………………….………………………………………………...
Parts Position…………………………………………………………………………………………………………..
2
7
*Side View……………………………………………………………………………………………………………. 7
*Back View…………………………………………………………………………………………………………… 8
4.
Basic Functions………………………………………………………………….. ……………..…………………….. 9
* Instrument Panel……………………………………………………………….……………..……….………….…. 9
* Main Switch、Lock Method、Release the Lock……………………………..………………………………..…... 10
* Left Handle Bar Control and Switch………………………………………………….…………………………….
11
* Right Handle Bar Control and Switch……………………………………………………………………………… 12
* Seat Lock、Helmet Clip……………………………………………………………………………………………. 13
5. Inspections (Prior to driving).…….…………………………………………….…..…………….………..…………... 14
6.
Trouble Shooting and Repair (1)……………………….……………………. ………………………….……..……... 16
7. Trouble Shooting and Repair (2) ………………….……………………. ………. …………………………………… 17
8. Periodic Maintenance Table…………………………………………………………………………………………… 18
9. Specifications (1)EVT-168
＊Lead-Acid
Battery…………………………………………………………………….. 19
10. Specifications (2)EVT-168
＊Lithium
Polymer Battery…………………………………………………………....... 20
1
1. Introduction:
Dearest User:
1.
2.
Thank you for choosing the EVT Electric Scooter.
We hope you have a pleasant time riding it.
It will also explain how
This manual will help you understand the operation, basic inspection and maintenance of your scooter.
to get the best performance and how to make your riding safer.
3.
4.
The contents of this manual may be slightly different from your scooter.
EVT Technology Co., Ltd. reserves the right of final explanation and modification of contents and specifications of this manual
without notice.
2. Operation:
●
Launch
1.
Hold the left handle bar and brake lever with your left hand, hold the lift bar with your right hand.
the main stand will jump up.
2.
3.
The side stand will jump while the scooter is moving forward.
Push the scooter forward;
Mount the scooter from the left side and sit well, keep your left foot on the ground to balance the scooter.
Turn the key to “ON” position to turn the power on and wait till the flashing LEDs on the dashboard and starting beep sound
stop in about 3 seconds, and then gently twist the throttle to pull away the scooter.
Do not twist the throttle while the LEDs
are still flashing, if so, the warning beep shall sound. Please re-turn the key to “ON” position and wait till the flashing LEDs
and starting beep sound stop.
4.
Do not leave the key in the “ON” position when the rider is not seated.
seated.
2
Be sure to turn the key to “OFF” when the rider is not
●
On Driving
1.
2.
3.
4.
Release the brake lever; gently twist the throttle to pull away the scooter.
While braking, apply front and rear brakes together to prevent the scooter becoming unbalanced.
Keep the light on while driving at night or in dark condition.
Always switch to low bean when on-coming traffic is approaching.
The driving range will be reduced in different driving conditions, i.e. : quick acceleration, excessive braking, lights on driving,
head-wind, carrying heavy loading, slope climbing, low tire pressure, low temperature and insufficient recharge.
5.
6.
If power shut off whilst braking, release the brakes and power supply resumes automatically in 0.5 seconds.
Over heat and over current will reduce the power by half or shut it off completely.
Please turn the key to “OFF” position,
wait for few minutes till the system to cool down then turn the key to “ON” position to start driving again.
7.
Quick acceleration from standstill, high degree slope climbing or heavy loading driving will make the battery voltage drop
quickly. The controller will detect the battery low voltage and cut the power to protect the battery.
“OFF” position, wait for few seconds then turn the key to “ON” position to start driving again.
8.
When around 10% of battery energy left (yellow LED on), quick acceleration may cut off the power.
recharge when around 10% of battery energy left (yellow LED on).
●
Parking
1.
2.
When the scooter is at a standstill, put your left foot on the ground and turn the key to “OFF” position.
Get off the scooter from left side, hold the left handle bar and brake lever with your left hand.
step on the paddle on the main stand with your right foot, pull the scooter backwards.
3.
Turn the handle bar to the leftmost position and shake it a little bit, turn the key to “LOCK” position and then take the key out.
3
Hold the lift bar by your right hand,
Strongly recommend to fully
Please turn the key to
●
Scooter Charging
1. Make sure the scooter is at “OFF” position and with the key out.
2. The Charging time depends on the battery energy left.
provide on average up to 90% battery energy.
3. Charger working with Lead-Acid Battery
(A) Off-Board Charger
a. Charger shall be put in the dry and ventilated area.
Rain or moisture will damage the charger.
b. Insert the DC connector into the scooter firmly, and
the AC connector into the standard outlet.
c. Check the 4 LEDs on the charger to realize the
charging condition.
d. Unplug the AC and DC connector after charging
is completed.
4Leds on Charger
Orange LED on
Green LED on
No LED on
Status
Charging in progress
Fully Charged
Charger failure
4
The standard charging time is 5 to 6 hours as power almost drained and will
To fully charge up to 100% battery energy level shall take another 2 to 3 hours.
(B) On-Board Charger
a. Do not Charge the scooter outside in the rain.
Rain or moisture will damage the charger.
b. Insert the AC connector into the standard outlet.
c. Check the 4 LEDs on the dashboard to realize the charging condition.
d. Unplug the AC connector after charging is completed.
4Leds on Dashboard
LEDs constantly flashing in 2 seconds.
LEDs on
No LED on
Status
Charging in progress
Fully Charged
Charger failure
5

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin