MPEGTV_USB USER MANUAL.DOC

Welcome to the world of Kworld Meg TV Station. With this multimedia product, you can use it as a convenient tool for multiple purposes including video conferencing, video editing, class presentation, or even entertainment.

Intervideo WinDVR

The powerful WinDVR will allow you to save TV and Video as Mpeg1 & 2 file. And the scheduler can let you preset the recording time of your favorite TV show.

Ulead Video Studio

With the Ulead Video Studio, you can edit the captured mpeg file and save the video as VCD format.

Features

Receive TV broadcasts: 125 channel cable/antenna-ready TV tuner

Receive and capture FM radio: Listen to the FM radio stations! (FM model only)

External inputs for video capture: AV and S-video inputs for external video resources like cameras and VCRs.

Video conference, video phone: MS NetMeeting for video conference

Wireless remote control included: Channels up/down, Volume up / down, Record and Play Video.

Full motion video capture: Save as AVI and Mpeg 1 & 2 (By the InterVideo WinDVR)

Still frame video capture: Capture to Image Buffer and save to different resolution and format (BMP, TIF and Jpeg)

External interface: 75 ohm IEC coaxial input (cable TV), FM radio antenna input, Composite (RCA) input, S-Video (SVHS) input, audio

input, and line audio output

CHAPTER1 HARDWARE SETTING

1.1 Package Contents

Unpack your Mpeg TV Station and make sure that all items are intact. The following items should be included in your Mpeg TV Station package:

§ Kworld Mpeg UBS TV BOX

§ Audio cable

§ Remote controller (Optional)

§ FM Antenna (for FM model only)

§ User’s Manual

§ CD of installation software

1.2 System Requirements

§ IBM PC or compatible

§ Intel Pentium III 500 MHz CPU or better processor

§ Minimum 64 MB memory

§ Minimum 100 MB hard disk space available

§ Universal Serial Bus (USB) Plug and Play compliant interface for easy, hassle-free installation.

§ VGA and with DirectDraw driver supporting 16 bit color or higher

§ Microsoft Windows 98SE/2000/ME

§ TV antenna or cable from CATV

§ Sound card

§ Speakers for audio output

§ CD-ROM drive

1.3 Hardware Installation

To install the BSB TV BOX into your computer, follow the steps below:

Ø Connect the SVHS output device to SVHS-IN

Ø Connect the camera or video tape recorder’s video output to AV-IN.

Ø Connect the video tape recorder’s audio output to the AUD-IN.

Ø Connect the TV antenna or cable to the TV-IN connector.

Ø Connect the FM antenna to the FM-IN connector.

Ø Connect the audio cable from line-in of the sound card to the AUD-OUT

CHAPTER2 DRIVER INSTALLATION FOR WINDOWS 98SE/2000/ME/XP

Your Mpeg TV Station package comes with complete Windows software utilities. These utilities can be found from the CD-ROM in this package. Prior to installation, it is highly recommended that all application programs should be disabled such as anti-virus software and system monitoring applications.

Note that there are two drivers required to be installed for each component.

Ø SPCA506A, WDM Video Capture

Ø SPCA506A, Sunplus USB Camera

2.1 Application Installation for Windows 98SE/2000/ME/XP

1. Please insert the Installation CD into the CD-ROM driver and the auto run page will pop up automatically.

2. On the auto run page, please choose “MpegTV Station /USB TV BOX” and then click on the “Mpeg TV Station/USB Application” to start the installation.

3. After the Application is finish installation, please click “OK” to reboot the Windows.

2.2 Driver installation of Windows 98SE/2000/ME/XP

After the application were installed well, and reboot the PC. Please plug the USB connector of the USB TV BOX to the USB socket of your computer and windows will automatically detect a new USB device that is your USB TV BOX and the add new hardware wizard pops up. Click on next (IF the USB device is not detected by your system, please restart your system and it should be detected. Then you can run the application program.)

2.3 Component Check - out

Components check - out

Go to Device Manager to check out if the driver has been installed.

CHAPTER3 MPEG TV STATION APPLICTION

3.1 Running the Mpeg TV Station for the first time:

Step1 Please click on the Start->Program->Mpeg TV Station USBTV->”Mpeg TV Station USBTV” to run the TV application.

Step2 At the first time running, please choose your country and language as below:

Step3 Please select the TV input and click Scan

Step4 Then you would see the figure on the left telling you the channel are being

scanned.

Note:

The Step2 and Step 3 are only for the first time. You don’t need to repeat the steps in the future. If you want reset, you can Go to | Start | Program | Mpeg TV Station | then double click “Reset Mpeg TV Station“.