2
GSM/GPRS/GPS Tracker
Model: TK200
Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release.
Contents
1. Summary 3
2. Main Features 3
3. Specs. 3
4. Installation 4
5. Function setting 4
5.1 Starting 4
5.2 Initialization 5
5.3 set password 5
5.4 Authorization 5
5. 5 Set central number 6
5.6 Remote switch on and off 6
5.7 Single Tracking 6
5.8 set time interval 7
5.9 Monitoring 7
5.10 Data Storage 8
5.11 Geo-fence alarm 8
5.14 Vibration alarm 8
5.15 Set all alarm mode 9
5.16 Sound Triggered callback 9
5.17 Check the Vehicle State 9
5.18 Device Reset 10
5.19 IMEI Checking 10
5.20 Time Setting 10
5.21 Set IP and Port 11
Working Based on existing GSM/GPRS network and GPS satellites, integrate tracking, listening, tracing and anti-theft all in one newest product. It can locate and monitor any remote targets by SMS or GPRS.
2.1 Remote start/close: device default send data to server at 30 minutes time interval.
2.2 Minimum Power Consumption 1uA: device can standby 3 years with minimum power consumption at 1uA.
2.3 LBS & GPS double tracking: combined GPS and LBS tracking technology, device can track anywhere even when there is no GPS signal.
2.4 No-install and non-interference: compact design for hidden tracking andcan avoid GSM signal detector.
contents
Parameters
Size
62x81 x35 mm
Network
GSM/GPRS
frequency
850/900/1800/1900Mhz
GSM module
MT6260
GPS chip
Ublox7020
GPS sensitivity
-159dBm
GPS accuracy
5m
GPS start
Cold start 45s
Warm start 35s
Hot start 1s
Battery
3.7V 6600mAh built-in battery
Storage temp.
-40°C to +85°C
Working temp.
-20°C to +70°C
humidity
5%--95%
4.1 The device has built-in GSM and GPS antenna, make sure the receive side upward and there is no metal shielding.
4.2 Recommended installation place: ①The hidden place in the board below the front windscreen; ② The hidden place around former dashboard (nonmetal material for skin); ③The hidden place in the board below the back windscreen.
Notice:
4.3 Device light description
Light
Signal
Red light
Power
Blue
GPS signal
Note: blue light blinking after power on, GPS device signal light will turn off once device received GSM GPS signal, blue light will recover to blink when device sends data to server again.
Open the case and find out the switch, turn the switch to “ON”, waiting for the charging about 1 minute, making sure the device is in working state.
Notice: All the command ...
mimi31