TOSHIBA CANVIO PLUS.pdf

(4665 KB) Pobierz
User’s Manual
CANVIO PLUS 2.5" (6.4cm)
EN
CZ
DE
DK
ES
FI
FR
GR
HR
HU
IT
NL
NO
PL
PT
RS
RU
SE
SK
SL
TR
AR
CANVIO PLUS 2.5"
Table of Contents
User’s Manual
Introduction................................................................................................. 3
Check the Components .............................................................................. 3
Safety Instructions ...................................................................................... 3
System Requirements ................................................................................ 4
Installing the drive....................................................................................... 4
Connecting the drive to your computer....................................................... 5
Dismount and disconnect the drive ............................................................ 6
Further Advise ............................................................................................ 6
Frequently Asked Questions ...................................................................... 6
Troubleshooting .......................................................................................... 7
TOSHIBA Support ...................................................................................... 8
Regulatory statements................................................................................ 9
User’s Manual
EN-2
CANVIO PLUS 2.5"
Introduction
Thank you for choosing our TOSHIBA Canvio Plus 2.5" Hard Disk Drive.
Please read this User’s Manual carefully, as it contains all relevant
information for installation, usage and maintenance of the drive, as well as
security and safety advice.
In case it does not behave as expected, please refer to the “Frequently
Asked Questions” section at the end of this manual.
Check the Components
Warranty Card
Canvio Plus 2.5”
(including User’s Manual)
USB 3.0 Micro-B Cable
Quick Start Guide
and Warranty Leaflet
This User’s Manual is uploaded on the drive itself. We recommend to
backup the User’s Manual onto a CD or your local hard disk drive, directly
after the drive being installed.
Safety Instructions
In order to avoid malfunction or damage of the drive, please carefully follow
the precautions listed below.
WARNING
■
Make sure that you backup all your data on the drive, as Toshiba is not
responsible for data corruption or data loss. Toshiba will not cover any
data recovery cost.
■
Do not
■
open the enclosure or drive
■
disassemble the drive or parts of it
■
place liquids near or on the drive, as it may damage the drive, cause
personal injury or may result in an electrical shock or fire
■
bump, drop or jar the drive
User’s Manual
EN-3
CANVIO PLUS 2.5"
move the drive while operating, as data damage may happen
use other connectors than USB bus powered types
disconnect cables while operating. Please dismount the drive first!
expose the drive to temperatures outside the range of 5°C – 35°C
while operating, and temperatures of -20°C – 60°C while switched off
■
expose the drive to wet or damp conditions
■
cover the drive during operation, as it may become overheated
■
Immediately disconnect the drive if
■
smoke or an unusual smell is coming from the drive enclosure
■
water has entered the drive enclosure or if it becomes wet
■
an object has entered the drive enclosure
■
the cable has been damaged (in such case replace the cable with a
new one)
■
■
■
■
CAUTION
irritation and/or heat injury.
This product can become hot! Avoid prolonged contact to prevent skin
If the drive behaves not as expected or you have doubts about the
electrical safety, please contact immediately the TOSHIBA hotline or an
authorised reseller!
System Requirements
■
Windows
®
XP / Vista
®
/ Windows
®
7 / Windows 8 / Windows 8.1
■
One free port of USB 3.0 or USB 2.0
NOTE
USB 3.0 is backward compatible with USB 2.0.
Installing the drive
Some information about bus-powered operation and the supplied USB
cable:
■
Your drive is bus-powered. Therefore, there is no need to connect an
external power supply as all needed current will be supplied by the
connected USB port(s).
■
Passive USB hubs or USB connectors like keyboards, mice or similar
products cannot be used or connected to the drive.
■
Make sure that the connectors will be inserted correctly.
■
Never use pressure for connecting the cables. Check the polarity before
connecting!
User’s Manual
EN-4
CANVIO PLUS 2.5"
Connecting the drive to your
computer
1
2
1. USB 3.0 Micro-B connector
2. USB 3.0 Standard-A connector
3
3. USB 3.0 host
backward compatible to USB 2.0
1. With your computer powered on and fully booted up, plug the USB 3.0
Standard-A connector into a USB port of your host system, or an active
USB HUB.
NOTE
You may need USB 3.0 Express Card Host Controller for your computer if
the computer doesn't have USB 3.0 port. You also can connect the device
to USB 2.0 port of your computer, However the transfer rate will be
downgraded to that of USB 2.0.
2. Now, plug the USB 3.0 micro-B connector into the corresponding port of
the drive itself.
Immediately,
■
the Power/Data indicator light will illuminate
■
the drive will power up
■
the drive should mount and a new drive icon should appear in “My
Computer”
User’s Manual
EN-5

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin