How to flash Samsung Stock Rom using Odin A4.pdf

(336 KB) Pobierz

How to flash Samsung Stock Rom using Odin

Home

Tutorials

» How to flash Samsung Stock Rom using Odin

Updated on December 10, 2016

These are the instructions to flash Samsung Stock ROM (original firmware) using Odin on Windows

Computer.

Requirements: Your Samsung Smartphone should have at-least 30-40 percent of phone batter to

perform the flashing process.

Flash Samsung Stock Rom using Odin

Step 1:

Download

and install Samsung USB Driver on your computer. In case you have already installed

the Samsung USB Driver on your computer then Skip this step.

Step 2:

Download

(Stock ROM compatible with your device or if you have already downloaded the

firmware then ignore downloading it again) and extract it on your computer. After extracting you will be

able to see these kind of files:

Step 3: Power Off your Samsung Device.

Step 4: Now, you have to boot into Download mode. To boot into Download Mode: Press and Hold

Volume Down Key, Home Key and Power Key. When phone vibrates Leave the Power Key but Keep

holding the Volume Down Key and Home key. You will boot into the Download Mode.

Step 5: In the Download mode you will be able to see a Warning Yellow Triangle Sign. In this situation

you have to press the Volume up key to continue.

Step 6:

Download

and extract Odin on your computer. After extracting you will be able to see the

following files:

Step 7: Now, Open Odin3 and connect your phone to the computer.

Step 8: Once you have connected the phone to the computer, Odin will automatically recognize the device

and show “Added” message at the lower-left panel.

Step 9: Once your device detected by Odin, click on the “PDA” button and select the tar.md5 file that you

have extracted in Step #2.

Step 10: Now, click on the “Start” button in Odin to begin the Flashing process.