2 Beginners Guide Coding.pdf

(6057 KB) Pobierz
Getting Started: FDL Coding
You will need the following items to begin your coding adventure.
(Please note: I am providing a general guide to coding within this document. You are assuming all
risk by following this guide, and I will not be held accountable should you cause damage to your
vehicle)
1. BMW Ethernet to OBD-II Cable (BMW ENET Cable).
2. ESYS Software: You can find the latest ESYS software available here:
E-Sys_Setup_3_26_1_b42487.exe
3. PSdZDATA Files for ESYS: You can find the latest PSDZData (Lite) files here:
v.56.4_PSdZData_Lite
PLEASE NOTE:
FULL PSdZDATA Files are only needed for Flashing ECUs &
not needed for VO or FDL Coding:
PSDZDATA Full: can be delivered with a linkage as per your request.
4. EST Token Solution for ESYS: You DO NOT need to purchase a token any longer. TokenMaster has
released a new tool called ESYS Launcher PREMIUM, which generates a personal token injects the missing
descriptive text in CAFD & FAFP files needed for FDL Coding & enhances the security of ESYS. Please visit here
ESysLauncherPremiumSetup_2.3.0_Build_75.exe
ESYS Launcher Premium is the “free” version of Launcher offered by “Token Master”. It is intended for personal use on 1
chassis. There are limitations in the software that limit you from how frequently you can change the chassis for coding.
If you want a fully functional version without any limitations, this version is called ESYS Launcher PRO.
5. Windows XP, Vista, 7, 8 or 10 (Native or Virtual Machine) computer with an Ethernet (RJ-45) Connection
 
6. Model-SpecificCheatSheets. Please see all documents included.
   
Software Installation / Preparation
It is VERY important that you setup/install the software in the following order.
1.
2.
Install E-SYS Setup 3.26.1.exe file, and begin the ESYS Software Setup (click through, accept all
agreements, use default locations for all software file locations when prompted during setup).
Use WinRAR to decompress PSDzDATA files to the location:
C:\data\psdzdata\
The sub-folders should be moved directly to C:\data\psdzdata\ as indicated in the picture below:
3.
Install and run E-SYSLauncherPremiumSetup2.3.0 Setup (Requires MS .NET Framework 4.0)
a. This is the Token Generator, as well as the program you should use to run ESYS (do not use the icon that
the ESYS installer provides to launch the program, instead use the icon that the launcher provides.
b. After installation, the Token Generation process will occur. Please see below and pick the correct file
location, and select your own personal 4-8 alphanumeric PIN code.
     
     
c.
ESYS Launcher will set the default memory settings, activate the free token for use with ESYS, as well as
validate that all CAFD files are signed by the developer to protect you from malicious CAFDs floating around
the internet! The Launcher will also provide descriptive text injection
“on-the-fly”
to allow you to use the
newest PSDzDATA with ESYS for FDL coding!
d.
Since people have tried to exploit the generous free tool created by Token Master, he has implemented a
48 hour delay before the software can be used. It also will only function for 1 specific model, chosen by
chassis code, so be sure to set it correctly. Please see screenshots below:
AFTER  48  hours  after  install,  when  you  open  the  launcher,  you  will  see  this  message:  
 
 
 
BE  SURE  TO  RUN  ESYS  from  the  ESYS  LAUNCHER  SHORTCUT  …  DO  NOT  USE  THE  
SHORTCUT  THAT  WAS  CREATED  BY  THE  ESYS  INSTALLER!!!  
4. Before we begin, here’s the MOST IMPORTANT PIECE OF INFORMATION THAT YOU NEED WHEN CODING
Under NO CIRCUMSTANCES SHOULD YOU EVER PRESS THE BUTTON “Code Default Values”
See BELOW for the location of that button in the Expert Mode; Coding Screen in ESYS
CODING TUTORIAL NOW BEGINS
Step 1: Connect cable to computer then to car (Ensure that your car’s engine is running during coding)
Step 2: Wait until LAN network adapter in task bar has established limited network capability (no screenshot)
To validate that the cable has a proper connection to the car, open up the LAN properties in Windows. The adapter should
be set to obtain IP Address via DHCP (You can NOT set a STATIC IP Address for LAN Adapter)
If you have a proper connection, your IP Address should be: 169.xxx.xxx.xxx
Remember to DISABLE Anti-Virus and Firewall Programs, which are KNOWN to interfere with ESYS communication via
Ethernet / LAN connection.
Step 3: Open E-Sys
Step 4: Click the Connect button

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin