Peugeot 206 HDI tuning guide.pdf

(1557 KB) Pobierz

Peugeot 206 HDI tuning guide

This guide was written whilst using winols demo version.

I will start off by showing you how to find the right maps using text mode and 2d

selection. The rest of the maps will be found via the automatic map search.

The file I am using is a 500 with 319 software.

To start off I will find the torque limiter. To do this you need to scroll through in 2d

mode. This is quite small, and will take you a few searches the first time you do it.

There will also be another with the same address in the 6**** section. It is easier to

find this if you search in the 16 bit mode.

Here is the torque limiter map:

Now I must select this map so it can be edited. If you press ‘p’ you will get the

preview window up. Then you need to highlight the map, 16 characters long. Right

click and then choose select map. Do the same for the torque limiter at 67d40:

Now you can make a folder and put both torque limiters in there.

The torque limiter ‘limits’ the amount of fuel allowed into the engine. There is no

point altering this, if you aren’t going to alter the smoke maps too. These can be found

through the auto maps.

If you leave the preview box up you can quickly click through maps until you find

what you are after.

Double click the map to open it. When you close it you ill be asked if you want to

save it. Do this for both smoke maps, and then make a new folder again:

The next map I am going to find is the rail pressure map. In this case it doesn’t come

up automatically. An easy way of finding it is searching through in text mode until

you find a series of ‘wedges’ like these:

If you view this in 2D mode it will make it easier to select the map. Again we want to

use the preview box.

Select the map again, and also the other rail pressure map in the ‘7’ section. Be

careful when selecting otherwise you will end up with the wrong part of it.

The next useful map to find is the rail pressure limiter. Luckily this is just after the rail

pressure map, and is easy to find. Sometimes it is just a square, this time it is a bit

more complex, and seemingly difficult to select properly.

Sometimes it is hard to select the right part, but this time I managed to do it first try.

Save this map and then find the other limiter again.