README.DOC

 ******************************************************************************
 *         Genius LAN GE2500III Ethernet Card  IBM LAN Server driver          *
 ******************************************************************************


   A. Diskette Introduction :
   ==========================

   This sub-directory contains the following structures:

   LANSRVR
      ³
      ³
      ÃÄÄ DOS         : Contains IBM LAN SERVER driver for DOS.
      ³
      ÀÄÄ OS2         : Contains IBM LAN SERVER driver for OS/2.


   B. Installation Guildline:
   ==========================

      FOR DOS:
      --------

        1.  Insert the PCI Slave Ethernet Card driver diskette into floppy
            drive.

        2.  In the directory the IBM LAN Server program located, press
            "INSTALL" to install the driver for PCI Slave Ethernet Adapter.

        3.  In the dialog box, select "Network card" and press ENTER
            to continue.

        4.  In the dialog box, select "Change driver for network card."
            and press ENTER to continue.

        5.  In the dialog box, select "Network card not shown in list
            below ..." and press ENTER to continiue.

        6.  To specify the drive and path to PCI Slave Ethernet Card
            driver diskette

            (e.g.,"A:\LANSRVR\DOS").

        7.  The "PCI Slave Ethernet Adapter" is shown in the
            listed dialog box.

        8.  If you need to change the configuration, select "Edit settings
            for network card driver." to change configuration such as IOBASE
            or INTERRUPT number.

        9.  After you installed completely, in DOS prompt copy the driver,
            PCIND.DOS, to the hard disk from the directory the driver
            located.


      FOR OS/2:
      ---------

        1.  Insert the PCI Slave Ethernet Card driver diskette into floppy
            drive.

        2.  In IBM LAN Server, select or run the MPTS (Multi Protocol
            Transport Service) program. refer to the IBM LAN Adapter and
            Protocol Support Configuration Guide for more information on
            this utility and for more details on how to install additional
            adapters and device drivers.

        3.  From the IBM MPTS dialog box, choose the "INSTALL" button to
            install a PCI Slave Ethernet Card for IBM LAN Server environment.
            If the PCI Slave ethernet card has already been installed, go to
            setp 6 below to continue.

        4.  Specify the drive and path (e.g., "LANSRVR") to the PCI Slave
            driver diskette (e.g., "A:\LANSRVR\OS2").

        5.  After installing/copying the appropriate NIF files from PCI Slave
            driver diskette, IBM MPTS dialog box will appear again.

        6.  From the IBM MPTS dialog box, select the "Configure".

        7.  In the Configuration dialog box, choose the "Configure LAN
            transports"(default) option and select "Continue".

        8.  When the Configure Workstation dialog box is displayed, remove
            the current configuration from the Current Configuration list
            box.

        9.  Choose the "Genius LAN GE2500III PCI Ethernet Adapter" from
            the Network Adapters list box, by highlight the entry.
            Then choose "Add" the GE2500III PCI Ethernet card to the
            Current Configuration list box.


        10. Highlight the appropriate protocols in the Protocols list box.
            Then choose "Add" to add them to Current Configuration list box.

        11. Choose "OK" to finish installation.
 ======================================================================