Readme.pdf

(637 KB) Pobierz
1. Introduction
The upgrade version of this software is
Version S.38
__________________________________________________________________
2. Key Features added in this software version
This software version includes:
•
Write Strategy Modification
1. Sony +R 8x SONY D11 Added
2. Sony +RW 4x SONY S11 Added
3. Sony -R 4x Sony 04D1 Modification
4. Sony -R 8x Sony 08D1 Modification
5. Sony -RW 2x RITEK W01 Modification
6. Sony -R 16x SONY 16D1 Added
7. Sony +R 16x SONY D21 Added
•
In case tray has no disc, brake time of spindle motor was modified to
decrease spindle rotation noise.
•
When seek failure happens, emergency function was modified regarding
focus function.
•
Error time out is modified from 60 second to 6 second during RECD search
function works.
__________________________________________________________________
3. Software Upgrade Disc Preparation
Tools Required
You will need the following items :
•
•
•
•
PC (Pentium III 300MHz processor or higher)
CD-R/RW writer and writing application software
Blank CD-R or CDRW disc
Broadband / High speed internet connection
__________________________________________________________________
4. How to download the software to your computer
1) Right mouse button click on the file and click ‘Save
Target As…
’ to save
the zip file into your PC.
2) Unzip the .zip file and extract files into your PC.
Do not change the filenames
__________________________________________________________________
5. Software Version Verification Procedure
It is important to write down the system version information of your set before you
start the upgrade procedure. This information is also useful in case you need to
call Philips Customer Care Center.
1. Press
Record
and
Play
button on the front panel at the same time.
2. Write down the
Loader Version Number.
3. Press
Record
and
Play
button on the front panel at the same time to exit
SETUP
page.
__________________________________________________________________
6. To make the upgrade CD
1. Save Two attached Files (LG_VDRVCR2_UPDATE.590 and
LOADER_UPDATE.RL2)
into you temp folder
2. Open your CD Writer program
3. Open your Tray in PC and insert the CD-R or CD-RW
4. Drag and Drop the Two attached files on CD's root folder. Please see below
example.
5. Rename : CD's Volume name (default is Serial Number or NEW)
=>
RC590M_UP
6. Burn the files to blank CD R or CDRW, using the following settings :
· File System CD-ROM ISO Level 2
· Mode 1/2/XA
· Character set ISO 9660
· Finalised, single session
·
Write speed slow (e.g. 2x, 4x)
Finalize the disc. (The application may do this automatically.)
NOTE : Packet writing application for drag & drop copying cannot be used
for creating an upgrade disc. Use only a dedicated CD writing application
allowing ‘disc at once’ recording.
No UDF setting as well.
7. Now Just Burn the CD
__________________________________________________________________
7. Steps to upgrade DVDR630VR
1. Power On the DVDR630VR
2. Press "Open/Close"
3. Insert the CD, just you burnt
4. After checking the CD, OSD is displayed. Please see below.
5. Press "REC", 3 times
6. OSD is displayed. Please see below.
7. Press "Right
Arrow",
2 times to move to the Button "ALL"
8. Press "OK". OSD is displayed. Please see below.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin