IC-R6_ENG_1.pdf

(9670 KB) Pobierz
INSTRUCTION MANUAL
COMMUNICATIONS RECEIVER
iR6
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
WARNING:
MODIFICATION OF THIS DEVICE TO RECEIVE
C E L L U L A R R A D I OT E L E P H O N E S E RV I C E S I G N A L S I S
PROHIBITED UNDER FCC RULES AND FEDERAL LAW.
FOREWORD
Thank you for purchasing this Icom product. The IC-R6
communications receiver
is designed and built with Icom’s
superior technology and craftsmanship. With proper care,
this product should provide you with years of trouble-free
operation.
We want to take a moment of your time to thank you for mak-
ing your IC-R6 your radio of choice, and hope you agree with
Icom’s philosophy of “technology first.” Many hours of research
and development went into the design of your IC-R6.
IMPORTANT
READ ALL INSTRUCTIONS
carefully and completely
before using the receiver.
SAVE THIS INSTRUCTION MANUAL—
This
instruction manual contains important operating instructions
for the IC-R6.
EXPLICIT DEFINITIONS
WORD
R
DANGER!
R
WARNING!
CAUTION
NOTE
DEFINITION
Personal death, serious injury or an
explosion may occur.
Personal injury, fire hazard or electric
shock may occur.
Equipment damage may occur.
Recommended for optimum use. No risk
of personal injury, fire or electric shock.
D
FEATURES
m
Covers 0.100–1309.995 MHz* wide
frequency range
*Some frequency bands are prohibited, depending on the
receiver version
m
External power supply operation
m
1300 memory channels with 22 banks
available
m
150
mW* AF power with BTL
(bridge-tied
load)
amplifier
*At
10% distortion with a 16
Ω
load (internal speaker)
i
Icom, Icom Inc. and the Icom logo are registered trademarks of
Icom Incorporated (Japan) in Japan, the United States, the United
Kingdom, Germany, France, Spain, Russia and/or other countries.
Microsoft, Windows and Windows Vista are registered trademarks
of Microsoft Corporation in the United States and/or other countries.
PRECAUTIONS
RWARNING!
NEVER
operate the receiver with a
earphone, headphones or other audio accessories at high
volume levels. Hearing experts advise against continuous
high volume operation. If you experience a ringing in your
ears, reduce the volume level or discontinue use.
NEVER
expose the receiver to rain, snow or any liquids.
The receiver may be damaged.
NEVER
operate or touch the receiver with wet hands. This
may result in an electric shock or damage the receiver.
RWARNING!
NEVER
operate the receiver while
driving a vehicle. Safe driving requires your full attention—
anything less may result in an accident.
NEVER
solder the battery cell. This may damage the bat-
tery.
DO NOT
use or place the receiver in direct sunlight or
in areas with temperatures below –10°C (+14˚F) or above
+60°C (+140˚F).
RWARNING!
NEVER
connect the receiver to an AC
outlet. This may pose a fire hazard or result in an electric
shock.
RWARNING!
NEVER
throw a battery cell into a fire
since as internal battery gas can cause explosion.
DO NOT
use harsh solvents such as benzine or alco-
hol to clean the receiver, because they can damage the
receiver’s surfaces.
Even when the receiver power is OFF, a slight current still
flows in the circuits. Remove batteries from the receiver
when not using it for a long time. Otherwise, the installed
batteries will become exhausted, and will need to be
recharged.
RWARNING!
NEVER
disassemble the battery cell.
If the battery cell’s internal material (electrolyte liquid) gets
into your eyes, wash your eyes with water and obtain treat-
ment from an eye doctor immediately.
NEVER
connect the receiver to a power source of more
than 6.3 V DC directly. This will damage the receiver.
NEVER
connect the receiver to a power source using
reverse polarity. This will damage the receiver.
ii
FCC INFORMATION
• FOR CLASS B UNINTENTIONAL RADIATORS:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential
installation. This equipment generates, uses and can radi-
ate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guar-
antee that interference will not occur in a particular instal-
lation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV techni-
cian for help.
OPERATING THEORY
Electromagnetic radiation, which has frequencies of
20,000 Hz (20 kHz*) and above, is called radio frequency
(RF) energy because, it is useful in radio transmissions. The
IC-R6 receives RF energy from 0.100 MHz* to 1309.995
MHz and converts it into audio frequency (AF) energy which
in turn actuates a loudspeaker to create sound waves.
AF energy is in the range of 20 to 20,000 Hz.
*kHz is an abbreviation of kilohertz or 1000 hertz, MHz is abbrevi-
ation of megahertz or 1,000,000 hertz, where hertz is a unit of fre-
quency.
OPERATING NOTES
The IC-R6 may receive its own oscillated frequency, result-
ing in no reception or only noise reception, on some fre-
quencies.
The IC-R6 may receive interference from extremely strong
signals on different frequencies or when using an external
high-gain antenna.
CAUTION:
Changes or modifications to this device, not
expressly approved by Icom Inc., could void your authority
to operate this device under FCC regulations.
iii
TABLE OF CONTENTS
FOREWORD �½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½ i
IMPORTANT �½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½ i
EXPLICIT DEFINITIONS �½�½�½�½�½�½�½�½�½�½�½�½�½�½ i
PRECAUTIONS �½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½ ii
FCC INFORMATION �½�½�½�½�½�½�½�½�½�½�½�½�½�½�½ iii
OPERATING THEORY �½�½�½�½�½�½�½�½�½�½�½�½�½�½ iii
OPERATING NOTES �½�½�½�½�½�½�½�½�½�½�½�½�½�½�½ iii
TABLE OF CONTENTS �½�½�½�½�½�½�½�½�½�½�½�½�½ iv–v
SUPPLIED ACCESSORIES �½�½�½�½�½�½�½�½�½�½�½�½�½ v
QUICK REFERENCE GUIDE �½�½�½�½�½�½�½�½�½�½ I–VII
n
Preparation �½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½ I
n
Your first scanning experience �½�½�½�½�½�½�½�½�½ III
n
Memory programming �½�½�½�½�½�½�½�½�½�½�½�½ IV
n
Programmed scan operation �½�½�½�½�½�½�½�½�½�½ V
1 PANEL DESCRIPTION �½�½�½�½�½�½�½�½�½�½�½�½ 1–4
n
Front, top and side panels �½�½�½�½�½�½�½�½�½�½ 1
n
Function display �½�½�½�½�½�½�½�½�½�½�½�½�½�½�½ 3
2 BATTERY CHARGING �½�½�½�½�½�½�½�½�½�½�½�½ 5–8
n
Battery installation �½�½�½�½�½�½�½�½�½�½�½�½�½�½ 5
n
Caution �½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½ 5
n
Battery charging �½�½�½�½�½�½�½�½�½�½�½�½�½�½�½ 7
3 FREQUENCY AND CHANNEL SETTING �½�½�½ 9–12
n
VFO and memory channels �½�½�½�½�½�½�½�½�½�½ 9
n
Frequency band selection �½�½�½�½�½�½�½�½�½�½�½ 9
n
Setting a frequency �½�½�½�½�½�½�½�½�½�½�½�½�½�½ 11
n
Setting a tuning step �½�½�½�½�½�½�½�½�½�½�½�½�½ 11
n
Selecting a memory channel �½�½�½�½�½�½�½�½�½�½ 12
n
Lock function �½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½ 12
4 BASIC OPERATION �½�½�½�½�½�½�½�½�½�½�½�½ 13–17
n
Receiving �½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½ 13
n
Setting audio volume �½�½�½�½�½�½�½�½�½�½�½�½�½ 13
n
Squelch level setting �½�½�½�½�½�½�½�½�½�½�½�½�½ 14
n
Receive mode selection �½�½�½�½�½�½�½�½�½�½�½�½ 14
n
Monitor function �½�½�½�½�½�½�½�½�½�½�½�½�½�½�½ 15
n
Attenuator function �½�½�½�½�½�½�½�½�½�½�½�½�½�½ 15
n
Duplex operation �½�½�½�½�½�½�½�½�½�½�½�½�½�½�½ 16
n
Dial select step �½�½�½�½�½�½�½�½�½�½�½�½�½�½�½ 17
5 MEMORY CHANNELS �½�½�½�½�½�½�½�½�½�½�½ 18–27
n
General description �½�½�½�½�½�½�½�½�½�½�½�½�½�½ 18
n
Selecting a memory channel �½�½�½�½�½�½�½�½�½�½ 18
n
Memory channel programming �½�½�½�½�½�½�½�½�½ 19
n
Memory bank setting �½�½�½�½�½�½�½�½�½�½�½�½�½ 20
n
Memory bank selection �½�½�½�½�½�½�½�½�½�½�½�½ 21
n
Programming memory/bank name �½�½�½�½�½�½�½ 22
n
Selecting display type �½�½�½�½�½�½�½�½�½�½�½�½�½ 23
n
Copying memory contents �½�½�½�½�½�½�½�½�½�½�½ 24
n
Memory clearing �½�½�½�½�½�½�½�½�½�½�½�½�½�½�½ 25
n
Transferring memory contents �½�½�½�½�½�½�½�½�½ 26
n
Erasing/transferring bank contents �½�½�½�½�½�½�½ 27
6 SCAN OPERATION �½�½�½�½�½�½�½�½�½�½�½�½ 28–37
n
Scan types �½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½�½ 28
n
Full/band/programmed link/programmed scan �½�½ 29
n
Scan edges programming �½�½�½�½�½�½�½�½�½�½�½ 30
n
Programming scan name �½�½�½�½�½�½�½�½�½�½�½ 31
n
Programming other contents �½�½�½�½�½�½�½�½�½�½ 32
n
Memory/all bank/bank link/bank scan �½�½�½�½�½�½ 33
n
Auto memory write scan �½�½�½�½�½�½�½�½�½�½�½ 34
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
iv

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin