1) Delete ALL versions of INPA-ADS from your computer or remane all INPA-ADS folders.
For example: remane INPA into “_INPA”, EDIABAS into “_EDIABAS” and so on.
2) Open folder Step_1\ in the root of CD-disk given. Copy folder EC-APPS onto disk С:\
3) Run file Step_1\NFS\Entpackt\disk1\SETUP.EXE
While installing choose User Mode
Further choose in opening windows:
1. Parametrieren einer neuen Konfiguration ohne Daten
2. OBD
3. Kein API-TRACE
4. Kein IFH-TRACE
5. Komfort (.IPO)
! RE-BOOT YOUR Computer !
4) Run file Step_2\INSTALL\Instprog.exe
1. Choose ENGLISH, press Continue, then press Continue again
2. While choosing the HDD disk for initial setup do not change letter C:\. Your
installation must be on drive С:\ ONLY !
3. Choose configuration BMW Group Rectification programs UK, press Continue.
4. Activate all spare boxes with : EDIABAS 6.4.3 - UPDATE, INPA 5.0.1 - UPDATE,
NCS Expert 3.0.8 - Complete
5. Press Continue.
5) Run file Step_3\INSTALL\Instprog.exe
4. Activate all spare boxes with: INPA 5.0.1 - UPDATE, NCS Expert 3.0.8 - UPDATE
6) Find the file С:\EC-APPS\INPA\CFGDAT\ named inpa.ini and replace it with the file inpa.ini that is in the root directory of CD-disk given.
7) Plug the Adapter into spare USB-port and install drivers manually from the folder Driver_D_CAN_USB using Driver Wizard of your Windows XP-Service Pack-2
8)Use following pictures for help.
9) In Advanced field change number of COM-port to the value from 2 to 4. Also change the
value of Latency Timer from 16 to 1. Remember the number of the COM-port choosen !
10) In the file EDIABAS.INI "Interface = STD:OBD" must be choosen
(That is default parameter after installing from CD-disk given. Check the parameter if you use
another version of INPA !)
11) In the file C:\Windows\OBD.INI put the number of USB-COM-port to the value that you
remembered in the step_3
12) Run from CD-disk a file Driver_D_CAN_USB\OBDSetup.exe
14) RE-BOOT your Computer !
15) Use the following order of using adaptor:
- Plug the Adaptor into spare USB-port
- Plug the Adaptor into OBD-II connector of BMW
- Turn the Ignition into ON position
- Rune the soft INPA with file С:\EC-APPS\INPA\BIN\inpaload.exe
- Choose the model of BMW and type of modul you want to see
- Close the soft and disconnect the Adaptor from USB-port each time you change the car
connected
N.B.:
Your Adaptor is already configurated to work with BMW both K-line and CAN-bus.
Modes of configurator file D-CAN.exe, that is on the CD-disk given in the folder
_D_CAN_USB as follows:
----------------------------------Configuration--------------------------------------------
For configuration interface:
Connect USB cable
Run D-CAN.EXE and setup CAN BUS mode.
LED should OFF
Don't use USB Extender cable, directly connect interface to computer.
jedynakk