naprawa konserwacja podwozia.doc

(4811 KB) Pobierz

Model

C`EED (ED)

Group

BODY (91)

Number

KCE17-91-P490-ED

Subject

CEED (ED) CHASSIS CORROSION INSPECTION AND ANTI CORROSION PROTECTION

Date

24th OF NOVEMBER 2017

Area

SEE BELOW

Type

SERVICE ACTION

1.      DESCRIPTION

This bulletin is issued to inform about the inspection of chassis parts for possible severe damage due to extensive corrosion and about the additional anticorrosion treatment.

 

■Symptom/condition

Corrosion of the chassis parts on Kia c`eed ED produced in Kia Motors Slovakia.

■Cause

To improve customer satisfaction, this service campaign is published to apply additional anti-corrosion

protection.

■Countermeasure/remedy

Inspect the chassis parts and apply the cavity waxing & undercoating for the affected positions described in

the service procedure below. When customer is arranging an appointment in the workshop please advise  

the customers to visit and carry out the washing of the chassis in underbody washer before visiting the work

shop to ensure clean underbody without dirt. Underbody washing is not part of this campaign.

 

2.      EFFECTIVE VEHICLE INFORMATION

■ Model: c`eed (ED) – produced in Kia Motors Slovakia,

■ Applicable vehicle production date range: From 13th of November, 2006 ~ 19th July, 2012,

■ Applicable VIN range: 5 Door from U5YFF24127L001002 ~ U5YHB511ACL314650

                        3 Door from U5YFF23428L000011 ~ U5YHB311ADL076687

                        Wagon from U5YFF52228L000040 ~ U5YHB816LCL256234

 

■ Area: Austria, Belgium, Denmark, Finland, France, Germany, Ireland, Italy, Netherlands, Norway, Spain, 

        Sweden, Switzerland, U.K, Czech, Hungary, Poland, Slovenia, Estonia, Slovakia, Croatia, Russia

 

 

3. REQUIRED TOOLS

PART NAME

PART NUMBER & PART PICTURE

REMARKS

WAX INJECTION GUN



 

Please order via MOBIS just once for one Dealer.

 

0K6242K100QQK

HAMMER



Conical head hammer only

MAGNETIC BAR



 

AIR GUN


IMG_2554

 

ENDOSCOPIC CAMERA


설명: 20161101_091620

 

Please order via MOBIS just once for one Dealer.

  1K6241F100QQK

BRUSH



 

 

 

 

IMPORTANT REMARK)

It is not allowed to order neither the wax injection gun nor the endoscopic camera, if these tolls have already been ordered for the similar campaign on KM (KCE17-91-V460-KM).

4. PARTS REQUIRED

PARTS NAME

PART NUMBER

REMARKS

BEFORE

      AFTER

CAVITY WAX

      ­


설명: http://service.hyundai-motor.com/UPLOAD/files/TSB_NEW/2015/04/20150402090612800_4KPZRCT8.jpg

Please order via MOBIS 680cc is required per 1 vehicle.

 

1 Package lasts for two vehicles. It is allowed to submit 1 part for 2 vehicles.

       YSBB1CA100QQK

 

 

 

 

 

BLACK UNDER COAT

(non-rubberized type)

 

 

 

 

 

 

-

 

 



 

      

 

 

 

Purchased locally and claimed by sublet

 

NORMFEST – Bottom guard recoat

 

Purchase this part at the local market and the actual cost should be claimed by a sublet.

CROSSMEMBER REAR

554101H100

554101H100QQK

 

 

 

 

 

...

Zgłoś jeśli naruszono regulamin