04223.pdf

(44 KB) Pobierz
DMP 250 (26-2886)
Adjusting the Print-Head Gap
Faxback Doc. # 4223
Adjust the print head position to accommodate the paper thickness by
moving the print head adjustment lever with a pointed object, such as the
tip of a ball-point pen. Do not use paper thicker than 1/125 (.0008) inch
(0.2mm) thick.
Having the gap too narrow can cause:
°
°
°
°
Print head damage
Paper damage at the left or right margin
Inaccurate line feed
The ribbon to loosen or come off its guide during printing
Having the gap too wide can cause:
° Print head damage
° Light printing
° Missing characters
┌───────────────────────────┬─────────────────────────┐
│
Print Head Adjustment
│
Number of Copies
│
│
Lever Position
│
(Including original)
│
├───────────────────────────┼─────────────────────────┤
│
-2 to -1
│
See "Notes" below
│
├───────────────────────────┼─────────────────────────┤
│
0
│
1 or 2
│
├───────────────────────────┼─────────────────────────┤
│
+1
│
3
│
├───────────────────────────┼─────────────────────────┤
│
+2
│
4
│
├───────────────────────────┼─────────────────────────┤
│
+3 to +6
│
See "Notes" below
│
└───────────────────────────┴─────────────────────────┘
Notes:
° The -2 to -1 settings are used only when characters appear faded as the
result of a worn ribbon. The +3 to +6 settings are used only when
printing on thicker paper or you have removed the ribbon cassette for
carbon imprinting.
° To print on four-part paper, feed the paper from the bottom of the
printer and set the CPY MODE menu to ON.
Faxback Document # 4233 will provide specific instructions for the Setup
Menu.
If smudging occurs, set the print head adjustment lever to a
setting by moving the lever toward the front of the printer.
higher

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin